Cangzhou Xinyue Steel Pipe Anti-corrosion Co

Main components
Two-component self-drying paint
Component B paint is composed of medium molecular epoxy resin, special resin, zinc powder additives and diluent.
Another component is amine curing agent.
Main Features
Rich in zinc powder, the electrochemical protective effect of zinc powder gives the coating film outstanding anti-rust properties.
The paint film has high hardness. High temperature resistance, does not affect welding performance.
Excellent drying performance.
High adhesion, good mechanical properties.
Surface treatment
The paint base must be clean and free of oil, dust and other contaminants.
The sand blasting or shot blasting treatment reaches Swedish level, and the manual mechanical rust removal reaches level 1.
Coating method
Airless spray thinner, epoxy thinner dilution rate is based on paint weight
Nozzle diameter is about spray pressure
Air spray thinner, epoxy thinner dilution The rate is based on the weight of the paint
The nozzle diameter is about the spray pressure
Roll coating/brushing thinner Epoxy thinner The dilution rate is based on the weight of the paint
Read the instructions before application.
Before use, adjust the ratio of paint and curing agent as required. Mix as much as you need, stir evenly before use, and use it within an hour.
Keep dry and clean during construction.
After the paint is mixed, the curing agent packaging barrel must be tightly closed to avoid gelling.
During construction and drying, the relative humidity should not be greater than 1. This product cannot be delivered for use until days after painting.
Zinc salts are easy to form on the surface of zinc-rich primers and should not be exposed for a long time before applying the subsequent coat of paint. If painting is done at long intervals, it is recommended to use an epoxy mica iron intermediate layer for sealing.