Cangzhou Xinyue Steel Pipe Anti-corrosion Co

Characteristics
It has excellent electrical insulation, water penetration resistance, microbial erosion resistance, stray current resistance, heat resistance and sudden temperature change resistance. The coating can be used between ℃. It is mainly used for the anti-corrosion of the outer walls of buried or underwater oil, gas, water and thermal pipelines. It is also suitable for the anti-corrosion of various types of steel structure docks, ships, sluices, gas storage tanks, refining and chemical plant equipment, and the waterproof layer of the roof of the sewage pool and the concrete layer of the basement. Anti-leak.
Technical indicators
Project unit indicators
Color brown-black
Viscosity coating cup ℃
Fineness
Coating thickness wet drying
Tab drying time
Full drying time
Completely cured and flexible
Adhesion scratch method
Impact strength
Construction technology
Surface treatment Steel is shot blasted or sand blasted , reaching the rust removal standard, or manual and power tool rust removal reaching the level.
Specific gravity of primer: approx. Topcoat: approx.
Theoretical dosage: primer grams/square meter, topcoat grams/square meter
Wet film thickness: Primer microns, topcoat microns
Dry film thickness confidence Approximately micron Topcoat Approximately micron
Proportion Primer Part A, Part B Curing Agent Top Coat Part A, Part B Curing Agent
Curing time at ℃
Applicability period at ℃
Coating method: High-pressure airless spraying, manual brushing and roller coating
Thinner, epoxy paint thinner
Coating interval: ℃ minimum hour, maximum day ℃ minimum hour, maximum day ℃ minimum hour, The longest day
Surface treatment The steel has been shot blasted or sandblasted to meet the rust removal standards, or the rust removal by hand and power tools has reached the grade
Number of coating passes: primer coating pass, topcoat pass, Reinforced grade plus alkali-free glass cloth layer
Precautions
Construction must be carried out under good ventilation conditions. During long-term construction, attention should be paid to protection.
Open flames are strictly prohibited on the construction site.
The surface temperature of steel should be higher than the dew point ℃ to facilitate manual construction.
Construction is strictly prohibited in fog, rain, snow and when the humidity is excessive.
The construction temperature should be greater than ℃
Storage and transportation
The storage period is months. Collisions should be avoided during transportation and stored in a cool and ventilated place. The storage period is one year. If it expires, it can be inspected according to the standard. If it passes the inspection, it can still be used. It is strictly forbidden to allow moisture to penetrate and to avoid direct sunlight.